Are You Making These Common Mistakes with Your Electric Sanding Pad?

While working with your electric sanding pad, there are any number of mistakes that can screw up your project. You’d think using a sanding pad would be a no-brainer, but it turns out there are plenty of missteps a person can make. In this blog post, we’ll identify some of the biggest mistakes out there and tell you how to avoid them to gain your sanding pad’s fullest potential, and go over some time saving tips to help you avoid common mistakes and get the most out of your RUIHONG electric sanding pad

Skip These Electric Sanding Pad Mistakes for a Smooth Finish

One common mistake is not looking at the grit size of the sandpaper. A grit that is too rough can scratch your surface while one that is too fine won’t smooth it enough. You will need to begin with a coarse grit and then move up to a finer grit in order to get the smoothest finish. Another mistake is not replacing the sandpaper frequently. When it gets dull, it won’t work properly and you’ll be wasting your time. Keep plenty of sandpaper ready and replace it frequently

Mistakes You Are Likely Making When Using Your Electric Sanding Pad

A lot of people tend to push way too hard on their sanding pad. This can strain the motor and cause your pad to wear out faster. You allow the pad to do the work, you are merely guiding it down.” Also: If you don’t use the right speed setting, you can ruin the thing you’re working on. If you remove it too fast, polishing can cause the material you are sanding to overheat. Check the RUIHONG sanding pad for the best speed you should use on your materials

Tips for a Flawless Job

Always ensure the surface you are sanding is clean before you begin. Dirt or other detritus can be trapped beneath the sanding pad and scratch your surface. It helps to move the sanding pad in equal, circular strokes. That can help you achieve a smoother, more even finish with minimal marks. Doing it right and taking your time will be better

Top Mistakes to Avoid with Your Electric Sanding Pad

One of the biggest mistakes is not securing your sanding material. It’s dangerous and can mess up your finish if it slides around when you’re working. Ensure that everything is secure before you set out. And you could be having problems if you're using a busted-up or old as hell sanding pad. Inspect your pad at regular intervals and replace as necessary

Putting Your Electric Sanding Pad to Use: Avoid These Mistakes

Ultimately, to achieve maximum performance with your electric sanding pad, you have to take care of it. Keep indoor taking in dry and safe place when not in use to avoid damage. And remember to clean it after every use. Getting it all cleaned up will keep it in good shape when you get ready for the next project. Apply these, and your RUIHONG electric sanding pad will deliver excellent performance on all your sanding projects